| Fuel Filter DQ24057 AT81478 FS1247 Parameter: | |
| Part Number | DQ24057 AT81478 FS1247 |
| Brand | Tamfiney |
| Weight | 523g |
| Height | 158 mm |
| Outer Diameter | 94mm |
| Inner Diameter/ Thread Size |
1" - 14 |
| Minimum Order | 100 PCS |
| Place of Region: | Zhejiang, China |
| Payment Terms: | T/T |
| Price Terms: | FOB |
| Lead Time: | 30 to 50 days based on order quantities |
| Market Type: | After Market |
| Current Export Market: | Southeast Asian,North America, South America, Western Europe, Eastern Europe, Africa, Oceania |
Applications:
ATLAS
AR 55AR 65-3AR 75 S
JOHN DEERE
1175 H2256225822642266 EXTRA540 G548 G6180 J6405640 E640 G6415648 G66056615740 G748 G75059600
Professional DQ24057 Water Separator Filter AT81478 FS1247
Q: Do I need a fuel water separator?
In scenarios such as high-pressure common rail engine models, machining workshops, and ship engine rooms, oil-water separators are important supporting equipment that can separate oil and impurities from fuel/wastewater, protect the engine, and avoid polluting water bodies. They are practical configurations with high cost-effectiveness.
Q: Can water separators work for compressed air?
The water separator is perfectly suitable for compressed air systems. It serves as the core pre-treatment equipment in the post-processing stage of air compressors and is commonly referred to as an air-water separator or oil-water separator.
Primary function
It can remove 95% to 99% of liquid water, oil droplets, and solid impurities with particle sizes ≥10μm from compressed air through physical methods such as gravitational settling, centrifugal separation, and inertial collision, achieving a separation efficiency of up to 99%.
Applicable scenarios
Typically installed behind the air compressor aftercooler, it serves as a pre-stage device for refrigerated/adsorption dryers and precision filters. It prevents liquid water from entering downstream equipment, thereby avoiding corrosion and blockage, reducing the purification load on subsequent stages, and ensuring the quality of air supply for applications such as pneumatic components and spray painting processes.
Adaptation Conditions
The standard model has a design pressure range of 0.1MPa to 2.5MPa, fully matching the typical operating pressure of 0.7~1.0MPa for compressed air systems, and can handle mainstream air compressor conditions with a flow rate ranging from 0.5 to 150m³/min.
