| Fuel Filter BF1346 BF1296-O Parameter: | |
| Part Number | BF1346 BF1296-O BF1346-SP BF1346-O |
| Brand | Tamfiney |
| Weight | 756 g |
| Height | 159 mm |
| Outer Diameter | 108 mm |
| Inner Diameter/ Thread Size |
1" - 14 |
| Minimum Order | 100 PCS |
| Place of Region: | Zhejiang, China |
| Payment Terms: | T/T |
| Price Terms: | FOB |
| Lead Time: | 30 to 50 days based on order quantities |
| Market Type: | After Market |
| Current Export Market: | Southeast Asian,North America, South America, Western Europe, Eastern Europe, Africa, Oceania |
What applications is the filter used for?
• Autocar Trucks: ACL series
• Mercedes-Benz: Integro M-O 550
Professional Baldwin BF1346 BF1296-O BF1346-SP BF1346-O Fuel Filter
Q: What is the Baldwin BF1346-O?
The BF1346-O is a heavy-duty spin-on fuel/water separator filter designed for high-efficiency fuel filtration. The "O" just indicates that the filter is designed with an Open Port at the bottom specifically for attaching an OE (Original Equipment) reusable bowl or sensor, allowing for water drainage.
Q: How to drain the water bowl?
Emptying the water cup of the fuel water separator is an important operation for regular maintenance of diesel or some gasoline vehicles, aimed at preventing moisture from entering the fuel system and causing corrosion or nozzle failure.
Preparation work
Park the vehicle in a safe and flat area, turn off the engine, and wait for the engine to cool down.
Prepare a fuel container with a capacity of approximately 0.2 liters to collect the discharged water and a small amount of fuel.
Positioning and operation
The fuel water separator is usually located in the engine compartment near the fuel filter or under the vehicle chassis. The specific location varies depending on the model, and it is recommended to refer to the User Manual for confirmation.
Place the container under the drain bolt (or knob) and slowly loosen the drain plug counterclockwise (usually about 5 or a few turns).
Let the liquid flow out naturally. At the beginning, you will see turbid water or impurities. When the flowing liquid turns into clear fuel, it indicates that the water has been basically drained.
Closing inspection
Tighten the drain plug clockwise to ensure good sealing and prevent oil leakage.
The manual fuel pump can be operated about 10 times to help remove residual air from the system and confirm that there are no leaks.
Start the engine for a trial run and observe if the "fuel water separator water accumulation" warning light still lights up on the dashboard.
Q: Is OEM or original better quality?
In the field of automotive parts, the quality of OEM parts is basically equivalent to that of original (factory) parts, but there are differences between the two in brand identification, after-sales support, and price. Here are the key comparisons:
Quality Comparison
Original parts: Authorized by the car manufacturer, with the original logo and number, exclusively for 4S stores or authorized channels, with the most reliable matching, performance, and after-sales guarantee.
OEM parts: produced by the same manufacturer according to the original factory standards, but without the original factory logo, belong to the "class of original factory parts". Its material, craftsmanship, and adaptability are almost identical to the original parts, and there is no significant difference in quality.
Core difference
• Logo and brand premium: Original factory parts include brand added value (commonly known as "logo tax"), while OEM parts are usually priced about 30% lower due to the lack of a logo.
• After sales guarantee: Original parts usually enjoy manufacturer's warranty and technical support; After sales of OEM parts rely on OEM manufacturers, and the scope of protection may be limited.
• Purchase channels: Original parts are mainly obtained through 4S stores; OEM parts can be purchased from legitimate auto parts dealers or online platforms.




