| Fuel Filter 23390-0L050 233900L050 Parameter: | |
| Part Number | 23390-OL050 233900L050 |
| Brand | Tamfiney |
| Weight | 120 g |
| Height | 88 mm |
| Outer Diameter | 84 mm |
| Inner Diameter/ Thread Size |
mm |
| Minimum Order | 100 PCS |
| Place of Region: | Zhejiang, China |
| Payment Terms: | T/T |
| Price Terms: | FOB |
| Lead Time: | 30 to 50 days based on order quantities |
| Market Type: | After Market |
| Current Export Market: | Southeast Asian,North America, South America, Western Europe, Eastern Europe, Africa, Oceania |
Applications:
Toyota for Hilux 2012-2015
Professional Toyota 23390-0L050 Fuel Filter 233900L050
Q: Where is the fuel filter location?
The location of the fuel filter varies depending on the vehicle model and design, but it is typically located inside the fuel tank, at the oil pipe connection under the vehicle chassis, or in the engine compartment.
Common installation locations
1. Internal fuel tank (built-in): Integrated with the fuel pump, commonly found in many modern models, such as the JEEP Grand Cherokee and BMW X1.
2. Under the vehicle chassis (external type): near the fuel pipe connection of the fuel tank, with a shape resembling a metal can. For example, the fuel filter of the Focus is located on the chassis beneath the right rear door.
Inside the engine compartment: For some models, it may be installed on the fuel pipeline in the engine compartment.
Q: Can I clean a fuel filter?
It is not recommended to clean the fuel filter yourself, especially for most modern family cars.
Why is cleaning not recommended?
• Special filter material: Most fuel filters use paper or non-woven fabric filters, which are prone to deformation and damage when exposed to water or ordinary cleaning agents, resulting in filtration failure or even detachment of impurities into the fuel system.
• Incomplete cleaning: Even with carburetor cleaner or gasoline rinsing, it is difficult to remove the tiny particles trapped in the micropores. Residual impurities may clog the fuel injector nozzle or damage the fuel pump.
• High risk of moisture residue: If the fuel is not completely dried after cleaning, the moisture mixed into the fuel will seriously affect combustion efficiency, and may even cause the engine to stall or corrode.
• The cost is disproportionate to the risk: fuel filters typically cost only a few dozen yuan, whereas engine maintenance can cost thousands or even tens of thousands of yuan. Replacing the filter with a new one is safer and more economical than cleaning it.
Q: How to change your Toyota fuel filter?
When replacing Toyota fuel filters, it is necessary to determine whether they are external or internal (integrated into the fuel pump assembly) based on the specific model, as the difficulty and steps of the operation vary.
I. Preparatory work
• Safety first: Wear protective gloves and goggles, refrain from smoking, and avoid static electricity (cotton clothing is recommended).
• Tool preparation:
o New fuel filter (ensure it matches the vehicle model)
o Wrench, screwdriver, and oil pipe clamp
o Oil receiving container, cloth
• Release fuel pressure:
Remove the fuel pump fuse, start the engine until it stalls, and allow the fuel system to depressurize.
II. Replacement steps (taking a common external type as an example)
1. Locate the filter
The external filters of most Toyota models are located at the bottom of the vehicle near the fuel tank or along the fuel pipe (such as on the left side above the right rear wheel).
For the built-in type, it is necessary to remove the fuel tank cover plate (usually located under the rear seats or inside the trunk).
2. Disassemble the old filter
o Secure both ends of the fuel pipe with pipe clamps or pliers to prevent fuel leakage.
Loosen the inlet/outlet fuel pipe connector and use an oil collection container to collect the residual fuel.
Remove the fixing bolts and take down the old filter.
3. Install a new filter
o Pay attention to the direction: The filter housing is usually marked with double arrows, and the arrow on the oil outlet end must point towards the engine.
Replace the sealing gasket (such as the pipa-shaped interface).
Install the new filter and tighten the bolts, ensuring that the oil pipe is securely connected.
4. Reset and testing
o Reconnect the fuel pump fuse and reconnect the battery.
Start the engine and let it run at idle speed for 3-5 minutes, checking for any oil leaks at the various connections.
If the engine is difficult to start, manual fuel priming can be performed (supported by some models).
III. Special Reminder
• Built-in filter (such as integrated within the fuel tank): The operation is complex and requires specialized tools, so it is recommended to be handled by professional maintenance personnel.
