What vehicles does HU1072X fit?

• SCANIA  D 16D 16 AD 16 MDC 16DC 16 ADI 16-48A/53AR 164-480R 164-580R 500R 500 EURO 3R 500 EURO 4R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 520R 560 EURO 4R 560 EURO 5R 580R 580R 580R 580R 580R 580R 580R 580R 580R 580R 580R 580R 580R 580R 580R 
• VREDO  VT 7138 Trac
• YANMAR MARINE   8 SY-STP

Performance Scania Filters HU1072X 1873014 2057893 LF17487 E21HD74 SC1873014 EO-8301

Scania, as a leading global commercial vehicle manufacturer, has oil filter models 1873014, 2057893, HU1072X, P550629, LF17487, and P7319 designed specifically for high-performance engines to ensure efficient lubrication system operation. These filter elements adopt multi-layer filtration technology, which can effectively intercept impurities such as metal particles and carbon deposits, and extend the life of the engine. Among them, 1873014 and 2057893 are compatible with major models in the market due to its high cost-effectiveness. LF17487 and P7319 are optimized for specific operating conditions to meet stringent emission requirements. All models manufactured by TAMFINEY are certified according to the ISO/TS16949 standard, ensuring filtration accuracy and durability.

FAQ

Q: What are the key types of Scania filters?

Scania, as a manufacturer of heavy-duty commercial vehicles, is equipped with various filters to ensure engine performance, emission compliance, and overall vehicle reliability.

• Air Filter
Used to filter the air entering the engine and prevent impurities such as dust and particulate matter from entering the combustion chamber. Using polyester fibers or specially treated paper filter materials, the filtration efficiency can reach over 99%.
• Fuel Filter/Diesel Filter
Used to remove moisture and small particles from diesel and protect the fuel injection system. It also has oil-water separation function.

• Oil Filter
Used to remove impurities such as metal shavings and carbon deposits from engine lubricating oil, and maintain the cleanliness of the lubrication system.
Other auxiliary filters
Including transmission and gas separator, air dryer filter, hydraulic system filter element, etc., used for cleaning and protection of specific subsystems

Q: How often should Scania filters be changed?

The filter replacement cycle of Scania buses is mainly determined based on factors such as the vehicle's operating environment, mileage, and oil type.
Engine oil filter (oil filter)
• Conventional situation: Replace every 5000 kilometers or every six months, usually synchronized with oil change.
• Using fully synthetic engine oil: can be extended up to 8000 kilometers or one year.
• Even if the mileage has not been reached, it is recommended to replace it if it exceeds six months, as the engine oil will oxidize and deteriorate.
Air filter
• Normal urban roads: replaced every 10000 kilometers or once a year.
• In areas with high levels of dust, sandstorms, or severe haze, it is recommended to replace it every 3-6 months or 5000 kilometers.

Cabin air filter
• General situation: Replace every 20000 kilometers or every two years.
• Poor air quality or frequent use of air conditioning: The cycle should be appropriately shortened.
Fuel filter
• Regular use of vehicles with good fuel quality: replace every 30000 kilometers or three years.
• Partial data recommendation: Consider replacing within the 10000-20000 kilometer range, especially when the oil quality is poor.
Air Dryer
Generally speaking, it needs to be checked and replaced every 60000 to 80000 kilometers or about a year, depending on the usage environment and  frequency. Long term non replacement not only reduces efficiency, but may also cause secondary pollution, which is not worth the loss.

Q: Is Scania a Chinese brand?

Scania is not a Chinese brand, but a Swedish brand.
Scania was founded in 1891 and is headquartered in S ö dert ä lje, Sweden.
Its brand history can be traced back to the merger of VABIS, a Swedish company, and Maskinbabriksaktiebolaget Scania, which has long been a representative of high-end commercial vehicles in Europe.
Although Scania has established a wholly-owned production base in Rugao, Jiangsu, China since 2020 and officially started production in October 2025, the factory is a wholly foreign-owned enterprise and its products are aimed at the global market. The brand nationality is still Sweden.
Scania is currently a commercial vehicle brand under the Volkswagen Group (through Traton Group), but Volkswagen Group's controlling relationship does not affect its brand's country of origin attributes.