| Hydraulic Filter HHTA0-37710 HHTA037710 HHTAO-37710 T2185-38031 Parameter: | |
| Part Number | HHTA0-37710 HHTA037710 HHTAO-37710 T2185-38031 |
| Brand | Tamfiney |
| Weight | 651g |
| Height | 178 mm |
| Outer Diameter | 92 mm |
| Inner Diameter/ Thread Size | 1 1/8"-16 |
| Material | Metal & Paper |
| Filter Media | High-efficiency pleated cellulose |
| Casing | Painted steel outer body with perforated steel internal support |
| Typical Working Pressure | Up to approx. 6–10 bar |
| Filtration | Approx. 5–10 micron |
| Temperature Rating | Up to approx. 100–120°C |
| Minimum Order | 100 PCS |
| Place of Region: | Zhejiang, China |
| Payment Terms: | T/T |
| Price Terms: | FOB |
| Lead Time: | 30 to 50 days based on order quantities |
| Market Type: | After Market |
| Current Export Market: | Southeast Asian,North America, South America, Western Europe, Eastern Europe, Africa, Oceania |
Compatibility
- Kubota Tractor: Fits various models including the Kubota B series (such as B20, B2100, B7500, B7500DT, B7500HSD) and L series (such as L2900, L3300, L3600, L4200, L5450), as well as select M-series tractors.
Professional Kubota HHTA0-37710 HHTA037710 HHTAO-37710 Hydraulic Filter T2185-38031
Q: How often should I change my Kubota hydraulic filter?
There is no fixed standard for the replacement cycle of Kubota hydraulic filters, which is generally calculated based on working hours. If calculated by time, it is recommended to replace it every 6 months to 1 year under normal working conditions, but it is more recommended to use working hours and pressure difference as the basis.
🛠️ The replacement cycle of different filter elements
- Return oil filter: Replace it after 250 hours of initial operation and every 500 hours thereafter.
- Suction Strainer: Replace it every 2000 hours of operation, which is relatively more durable.
- Pilot filter: usually replaced synchronously with the return oil filter element, usually after 500-1000 hours.
- Hydraulic oil: It is generally replaced every 2000 hours, and all filter elements must be replaced at the same time when changing the oil.
Q: Where is the hydraulic filter located on a Kubota tractor?
The hydraulic filter locations on Kubota tractors vary by model, but typically include these common positions: inside or on the side of the hydraulic oil tank (suction filter), on the return oil line of the hydraulic system (return filter), and near the transmission or rear axle housing (HST filter).
🔧 Common Installation Locations
- Inside or on the side of the hydraulic oil tank: The suction oil filter is typically installed in the tank, near the suction port of the hydraulic pump. It can be viewed by opening the tank cover or accessing it from the side. Some models also have a return oil filter, which is horizontally mounted inside the tank.
- Return oil line: The return oil filter is installed in the pipeline where hydraulic oil flows back to the tank, used to filter out impurities generated by system wear.
- Transmission/Transfer Case Housing: On many Kubota tractors (e.g., the B series), the HST (hydrostatic transmission) filter is mounted on the side of the transmission housing. The filter screen or cover must be removed first to access it.
📋 How to Quickly Locate
- Inspect the hydraulic oil tank: Open the top cover plate to view the oil-immerged suction filter element.
Follow the hydraulic pump's suction pipe: The filter element is usually near the pipeline connecting the oil tank to the hydraulic pump. - Inspect the side of the transmission: The HST filter is mostly of the spin-on type, resembling an oil filter in appearance and directly screwed onto the housing.
- The layout varies by model. For the most accurate location, refer to the user manual or maintenance manual of the specific model, which will indicate the exact position of the filter and its replacement cycle.







