Kubota HH160-32093 Oil Filter Cross Reference 16271-32090 B1425 W814/80 LF3536

What models does the HH160-32093 fit?

AIRMAN  AX 30-2AX 30 VR2NAX 52 U-5PDS 185 S-5C5PDS 185 S-6C2PDS 185 S-7C5PDS 185 SC-5C5PDS 185 SC-7C5
AMMANN  AMX 100AMX 85APH 110-95ARX 12-2ARX 16-2ARX 20-2ARX 20-2AV 95 N
ATLAS COPCO  HiLight B5+HiLight B7+ KD S5HiLight H6+HiLight H7+LSV 9QES 9QLTH 50QWS 350SpeedROC D30V 5+VAR 4-250 D ITHXAS 37 KDXAS 58XAS 58-7XAS 67 KDXAS 67 KDXAS 68 KDXAS 78XAS 87 KDXAS 87 KDXAS 88XAS 88-7XAS 88 KDXATS 68
AVANT TECNO 528 +AVANT 528 +AVANT 528 +AVANT 528 SERIE IIAVANT 530 +AVANT 530 +AVANT 630AVANT 635M 630 EZMTT
BETA MARINE  BD1005BETA 28BETA 30BETA 35BETA 38BETA 45 TBETAGEN 10BETAGEN 11BETAGEN 12BETAGEN 22/2BETAGEN 25/2BETAGEN 26BETAGEN 33BETAGEN 7BETASET 10BETASET 11BETASET 12BETASET 22/2BETASET 25/2BETASET 26BETASET 33BETASET 7BV1205BV1305BV1505BV3300D 905V 1505

BOBCAT   F553 F553 F553 F923BAP 720E 25E 25E 62E 62E 63E 63E 85E 85PL 50 - LSCK 4T 300T 300T 300T 300
BOMAG  BMP 8500BMP 8500BMP 8500BMP 8500BW 131 ACW-3BW 131 AD-3
CARRIER  MAXIMA 1000MAXIMA 1200MAXIMA 1300MAXIMA 25/S
CASE  CK 25CK 62CX 100 ECX 26 CCX 30 CCX 33 CCX 37 CCX 57 CCX 60 CCX 85 DCX 85 D SRCX 85 ECX 90 DCX 90 D MSRCX 90 ETL 100
COMBILIFT  C 5000 DSTCB 3000
COMPAIR-HOLMAN  C 30C 30C 35-10C 38 GC 42C 50DLT 0408 -02DLT 0408DLT 0409
KUBOTA  AM 3300AR 20AR 30B 1241 D-ECB 2231 HDBB 2231 HDB-CB 2311 HDBB 2311 HDB-CB 2400F 2404 4WDF 251F 3060F 3060F 3060 RF 3560F 3680F 3890 EUF 391FZ 2100FZ 2400KX 024KX 027-4KX 030-4KX 037-4KX 27KX 36-2KX 36-2 

Performance Kubota HH160-32093 Oil Filter Cross Reference 16271-32090 B1425 W814/80 LF3536

Q: How often should I change the oil in my Kubota tractor?

The oil change cycle of Kubota tractors mainly depends on the accumulated working hours of the engine, rather than the mileage or calendar time. Overall, the recommended replacement range is as follows:

Regular replacement cycle: 500 to 1000 hours. This is a general recommendation for most Kubota tractor models, suitable for use under normal operating conditions.
Specific model differences: Different series of Kubota tractors have different maintenance requirements. For example:
Z482 series: It is recommended to change the oil every 200-300 hours.
D722 series: It is recommended to change the oil every 250-300 hours.
D1105 series: It is recommended to change the oil every 300-400 hours.
V2403 series: It is recommended to change the oil every 400-500 hours.

Key factors affecting replacement cycle

Even within the recommended hours range, it is recommended to shorten the replacement cycle in the following situations:
• Adverse working environment: such as frequent operation in dusty, high temperature, high humidity or muddy environments, the engine oil is prone to contamination and deterioration.
• High load operation: Long term full load or overload work will accelerate the decline of oil performance.
Poor fuel quality: Poor quality fuel may lead to incomplete combustion and impurities mixed into the engine oil.
• New car running in period: It is recommended to perform the first oil change around 200 hours of first use to remove metal debris generated during the running in period.

Important Notice

1. Observe the oil condition: Regularly check the color and texture of the oil through the dipstick. If the oil color turns black, thickens, contains impurities, or has an odor, even if it has not reached the recommended hours, it should be replaced immediately.
2. Synchronize oil filter replacement: Every time the oil is changed, a new oil filter must be replaced at the same time. Otherwise, impurities in the old filter element will contaminate the new engine oil and reduce the lubrication effect.
3. Use matching engine oil: Be sure to use the oil model and specifications recommended by Kubota official to ensure optimal engine protection.
Summary: Based on 500-1000 hours, combined with your specific model, usage environment, and oil condition, make a comprehensive judgment.

Q: Is HH160-32093 the same as 16271-32090?

Yes, it is a superseding, interchangeable part for many Kubota filters.

Q: Why do you put a thin film of oil on the new oil filter gasket?

Applying a thin layer of engine oil to the gasket (seal) of the new oil filter is a critical and widely recommended standard procedure when replacing the oil filter, primarily based on the following two core purposes:
• Enhanced Sealing: The engine oil forms a uniform lubricating film between the contact surfaces of the sealing ring and the engine mounting base, helping the sealing ring fit more tightly and evenly against the metal surface, thereby effectively preventing oil leaks after replacement.
• Prevent Installation Damage: During the tightening process of a new filter element, the dry rubber sealing ring is prone to twisting, tearing, or scratching due to friction. Applying engine oil can significantly reduce friction resistance, protect the structural integrity of the sealing ring, and ensure its long-term sealing performance.

Additionally, this operation has a practical byproduct: it facilitates future disassembly. The lubricated seal ring is easier to remove during subsequent replacements, preventing it from "sticking" to the filter housing due to prolonged exposure to high temperatures and pressure, which could otherwise make disassembly difficult or even damage the housing threads.

Important Note: Apply only a very thin layer of engine oil. Excessive use may cause the oil to be squeezed out during installation, contaminating the engine compartment and potentially compromising the sealing effect, leading to oil leakage.
Please note that applying oil is intended for the sealing ring, not for filling the entire filter element with oil (unless it's a specifically vertically installed filter, which is rare).