| Hydraulic Filter 0160MG010P 848101076 1966553C1 BT8477 Parameter: | |
| Part Number | 0160MG010P 848101076 1966553C1 BT8477 |
| Brand | Tamfiney |
| Weight | 2405g |
| Height | 227 mm |
| Outer Diameter | 128 mm |
| Thread Size | 1 1/4 BSP |
| Material | Metal & Paper |
| Filter Media | High-efficiency pleated cellulose paper |
| Casing | Painted steel outer body with perforated steel internal support |
| Typical Working Pressure | Up to approx. 6–10 bar |
| Filtration | Approx. 5–10 micron |
| Temperature Rating | Up to approx. 100–120°C |
| Minimum Order | 100 PCS |
| Place of Region: | Zhejiang, China |
| Payment Terms: | T/T |
| Price Terms: | FOB |
| Lead Time: | 30 to 50 days based on order quantities |
| Market Type: | After Market |
| Current Export Market: | Southeast Asian,North America, South America, Western Europe, Eastern Europe, Africa, Oceania |
Applications:
- MANITOU - MHT10120, MHT10225, MHT780, MRT1840, MRT1850, MRT2145, MRT2150, MVT1130, MVT628, MVT660, MVT665, MVT730, MVT735, MVT930, VTB30, VTSB30.
- NEW HOLLAND - FX375, FX38, SB36, SB52, SB54, SB56, SB58, SB60.
- TEREX - 2306, 3013, 3509, 3512, 3713, 4017, 4514, GTM3510.
Professional Hydac 0160MG010P Hydraulic Filter 848101076 1966553C1 BT8477
Q: How do you safely change a HYDAC filter element?
🔩 Disassemble the old filter element
- Oil discharge: Open the bottom oil discharge port of the filter and drain all residual oil in the filter housing into the collection bucket. The collected old oil should not be directly poured back into the fuel tank to avoid secondary contamination of the system by impurities.
- Dismantling the filter cover: Remove the exhaust hose and pressure differential transmitter connection line from the filter cover, and mark the interface. Use a specialized wrench to unscrew the filter cover counterclockwise; The bolt tightening method should be gradually loosened diagonally to avoid stress deformation of the filter cover.
- Remove the old filter element: Slowly lift it vertically upwards, and if it is stuck, gently shake it left and right to assist in removal. Do not forcefully pry or remove it. Immediately put it into a sealed plastic bag after removal, label the replacement date and equipment number, and dispose of it according to hazardous waste regulations.
- Key inspection: Observe the surface pollutants of the old filter element - metal debris indicates pump/valve wear, gel like impurities indicate oil oxidation and deterioration, and large particles of foreign objects indicate seal damage or external invasion. At the same time, check whether the filter cover thread, bypass valve core, and O-ring are damaged. Damaged parts must be replaced simultaneously.
✅ Install a new filter
- Verification and inspection: Confirm that the model, accuracy, and material are consistent with the original filter. Check the appearance of the new filter - the filter material is not damaged, the end cover is not deformed, the sealing ring is intact. Tear off the outer packaging. Do not touch the surface of the filter directly with your hands.
- Lubrication sealing ring: Apply a layer of clean hydraulic oil of the same model evenly on the O-ring of the filter end cover and the sealing ring of the filter housing, and confirm that the sealing ring is embedded in the groove without distortion or deviation. It is strictly prohibited to pour hydraulic oil into the inner cavity of the filter element.
- Installation and direction confirmation: The principle of oil flow direction is to flow in and out from the inside. If there is an "IN → OUT" arrow on the side wall of the filter, the arrow must point in the direction of the oil outlet; The arrow of the return filter points to the fuel tank, and the arrow of the high-pressure filter points downstream of the system.
- Tighten the filter cover: After manually screwing the threaded filter cover into the contact sealing surface, use a torque wrench to tighten it to the specified torque (usually 25-30N · m, according to the equipment manual); The bolt type should be tightened evenly 2-3 times in diagonal order, and excessive tightening is prohibited.
Q: How do I find a matching HYDAC replacement or crossover filter?
To find HYDAC replacement filters, the most reliable method is to look up the original manufacturer's model number, then verify the dimensions, accuracy, and material specifications, rather than relying solely on the brand name. Follow these steps for specific guidance.
🔍 Selection Method
- First, confirm the original manufacturer model: Locate the complete model number from the end cap, housing label, or equipment manual of the old filter, such as 0160D010BN4HC, 0500D005ON/-V, as this serves as the basis for matching.
- Use Model Reverse Search for Replacement: Enter the model number into the industrial filter element selection tool or supplier platform, and the system will match the corresponding domestic alternative models and parameters.
- Verify key parameters: Focus on confirming the filtration accuracy (μm), dimensions (outer diameter × height), interface/thread specifications, filter material (fiberglass/metal mesh, etc.), pressure resistance, and sealing ring material. Any mismatch may affect usage.
- Request for Test Reports: A reliable supplier should be able to provide reports such as ISO 16889 multi-pass testing and ISO 2941 burst pressure, which serve as the core basis for assessing whether performance meets standards.
