Donaldson Oil Filter Cross Reference P554005 C-5502 C5502 504594D1 4425274

Application:

JOHN DEERE  1188 SII HYDRO 4
KAESER  FSB 440
KENWORTH  T 800T 864
KLEEMANN REINER  MRB 122 Z
NAVISTAR INTERNATIONAL  MaxxForce 11MaxxForce 15
NEW HOLLAND  FX 58FX 60
PEGSON  1000 AUTOMAX1000 SR1100/650 PREMIER TRACK1100 X 800

ROMAN DAC  19.410 FLS22.225 DHAE22.380 DFA26.300 DFK26.380 DFAR/DFAER26.410 DFS32.300 DFK/VF/VFK38.380 VF/VFK40.300 VF72.600 MFEG
SANDVIK  DI 400DI 500
SENNEBOGEN  640 HDSR 25 TSR 35 TSR 45 T
SULLAIR  1150 XHH CAT900 XH CAT900 XHH CAT
TAMROCK  ANTERA 110ANTERA 110PANTERA 1100TITON 400TITON 500
WIRTGEN  SF 1900 VCSF 2000 VCSF 2200 VCVC 2000W 2000W 2000W 2100W 2100W 2200W 2200WR 250

Premium Donaldson Oil Filter Cross Reference P554005 C-5502 C5502 504594D1 4425274

Q: How often should the P554005 filter be replaced?

The oil filter replacement cycle varies and depends on oil type, vehicle use, and manufacturer advice. Typically, replace it every 10000 to 15000 kilometers or every 6 months. Adjust the timing based on actual conditions.

Engine oil type significantly impacts replacement intervals. For mineral oil, change it every 3000-4000 kilometers or every 6 months. Semi-synthetic oil allows longer intervals, so replace it every 5000-6000 kilometers or every 6 months. Fully synthetic oil performs better, so you can replace it every 10000-15000 kilometers or every 8 months.

Vehicle usage conditions also play a key role. Frequent short trips or high-load operation speeds up oil and filter aging. Harsh environments like dusty or hot areas may require more frequent changes. In contrast, stable long-distance driving permits longer intervals.

Always replace the filter when changing the oil. This ensures optimal protection for your engine.

Q: How tight should the filter be when installing a new one?

When installing a new filter, the tightness should be moderate to ensure sealing and avoid damaging components.

General principle: The tightness of the filter should follow the principle of "moderate tightening", that is, after initial fixation by hand, limited tightening should be carried out with tools to avoid excessive force. The key is to judge whether it is in place through slight resistance, usually based on the sealing ring fitting and no shaking. Over tightening may cause deformation of the filter element or damage to the sealing ring, while over loosening may cause leakage.

Specific example: Different types of filters have specific requirements. For example, when installing a diesel filter, first align the bracket with your hand and tighten it, then use a filter wrench to tighten it moderately, with no leakage as the standard; The plug-in frame of the high-efficiency air filter (HEPA) needs to be gently pushed to the slot for locking, while the bolt fixed type needs to be gradually tightened diagonally to avoid uneven force distribution; When installing the oil fume purification filter, it is necessary to ensure that the interface is aligned and fastened with fixing parts, and at the same time, check the sealing gasket to prevent oil fume from overflowing.

Inspection and verification: After installation, a running test should be conducted, such as starting the device to observe whether there is any leakage at the connection, and rechecking after running for a few minutes to confirm the appropriate tightness.

Q: What other filter brands cross-reference with Donaldson?

Donaldson filters are often cross referenced with other brands in industrial and engine applications, mainly in the fields of construction machinery, air filtration, and fuel filtration. The following is a list of major brands based on relevant information.
In the field of construction machinery, Caterpillar is an important cross reference brand of Donaldson. Donaldson provides air filters and other components for Caterpillar equipment, such as alternative models such as 6i-2505/6i2505 air filters directly labeled as compatible with Caterpillar Construction Machinery.
In addition, Fleetguard also has a substitution relationship with Donaldson, with some filter models such as ff5367/p550391 interchangeable for engine filtration systems.
In the field of engine filtration, besides Frega, the DAVCO brand also has technical overlap with Donaldson.